Replacement parts and accessories for Ski Trab TR-Race, Gara Titan, and TR-2 bindings. All are sold in pairs. Also see our listings for complete toes and heels.

Crampon Attachments - Slide underneath the toe pieces and accept standard tech binding ski crampons.

Heel Forks - Choose from titanium or steel (+9g) replacement heel forks for your Gara Titan, Titan Vario, and TR-Race bindings.

Titan Race Toe Levers - The lightweight toe lever for the original Gara Titan binding. They are flat on the bottom and lock against the topsheet of the ski.

Titan Easy Toe Levers 1.0 - Replacement Gara Titan toe levers that are longer with a bigger tip for easier operation. For use with generation one Titan toes that have a black post at the spring pivot point (aka pry-bar). Also included are striker plates that the levers lock against. They have 1.0 printed on them and need to be mounted under the toe.

Titan Easy Toe Levers 2.0 - Easy toe lever for use with the second generation of the Gara Titan bindings that have a silver band at the spring pivot point. Also included are striker plates that the levers lock against which prevent you from pulling the lever too far. They have 2.0 printed on them.

Titan Easy Toe Levers Adjustable - Toe levers for the Gara Titan bindings with plates that go underneath the toes to match the taller heel height. The levers lock against grooves in the plates.

Titan Toe Lock Plates - Lever lock plates under the front of the toes on Gara Titan bindings. These are mounted underneath the toes and enable the locked/unlocked modes.

Titan Toe Shim/Lock Plates - Lever lock plates for Titan Vario.2 bindings that also raise the toe piece. Plates are 4.5mm thick and work with any Titan toe. Typically mounted with 19mm torx screws found below.

Titan Leash Loops - Swaged wire loop used as attachment point for leashes on the Titan series.

Race Heel Flaps - Replacement heel flaps for Gara Titan heel pieces. Now in blue.

Vario Adjustment Plate Heel Shims - One millimeter thick shims that get mounted between the heel pieces and the adjustment plates on Vario bindings (works with Vario.2 or "1").

Mounting Screws - Race toes and fixed heel pieces use flat head Torx screws. The adjustable race heels uses pan head Torx. The 19mm screws are for Titan toes with the shim/lock plate that ships with the adjustable version.

Vario Adjustment Plate Screws - The machine screws that attach the Titan Vario heels to the Vario adjustment plates.